Scrap processing equipment

Pre-crushing machine

To use:

The prebreaker can pretreat the scrap car with the engine and the mass. When used in combination with crushing line
1. can effectively improve the efficiency of the crushing line, maximize the amount of material
2. Extend the service life of wearing parts and reduce the replacement frequency of wearing parts such as hammer head and grid plate
3. after the pre-crusher treatment, the crushing machine runs in the most economical energy consumption mode, saving power consumption
4. avoid gas tank, oil tank and other flammable and explosive materials into the crusher, reduce the risk of explosion, improve safety.

Features:

1. Unique design of shaft and crushing edge, strong crushing force, easy to break the block.
2. by adjusting the compression edge, you can freely adjust the production capacity and crushing size.
3. using hydraulic pump and torque motor drive, vibration load is small.
4. The crushing edge is made of special steel and quenched to improve the service life.
5. using PLC remote control system.

ZLJ series large fixed grasping steel (material) machine

Technical parameter

Maximum grab height: 14.6m
Maximum grab depth: 3m
Maximum grasping radius: 16m
Rotation Angle: 360°
Rotation speed: 4rpm
Installed power: 67kw
Grab weight (including grab):2200kg(16m)

LMG series mobile grab steel (material) machine

To use:

It is a special product developed by Lidi Company, with a standard excavator as the chassis, using the tilt grab independently developed by Lidi Company. The application range includes material handling, stacking, loading, loading and unloading of material handling equipment.

LMD Car dismantling machine

To use:

The machine is equipped with a front press arm that can firmly press and clamp the body or other materials, and a car cutter that can rotate 360 degrees to cut and tear. Through the cooperation of the two, the scrapped cars can be dismantled efficiently and environmentally friendly.

Features:

1. strong mechanical properties can be directly removed quickly.
2. equipped with a rich function of the front press arm, can easily achieve the tire, engine disassembly.
3.can expand the disintegration and classification of waste household appliances and other complex items.

Technical parameter

Maximum working radius: 10936mm
Maximum working height: 10662mm
Maximum shear force: 170 ton
Maximum opening width of hydraulic shear: 600 mm

LMS240 scrap steel shearing machine

It can easily cut large scrapped car carriages, various beams, steel frame structures and other scrap steel.
Maximum working radius: 10875mm
Maximum working height: 10603mm
Maximum shear force: 259ton
Hydraulic shear maximum opening: 668mm

Small fixed grab steel (material) machine

LZD series of small fixed steel grab (feeder) machine is specially developed for small scrap steel treatment equipment, including balers, shearing machines, small crushers and other loading and unloading products.

Features:

1. Specially designed for small equipment, it can reduce the weight, power and floor area of the equipment under the condition of ensuring the use demand, and reduce the use cost of the customer while exerting the maximum use efficiency of the equipment.
2. Small footprint, small turning radius of the fuselage, can effectively improve customer site utilization.
3. Grab bucket can be assembled according to the characteristics and weight of the material, can choose the plum grab bucket or fork grab bucket, the applicability of the material, grasping force is very good.